Herunterladen Diese Seite drucken

OSRAM BATTERYcharge PRO OSCP3024 Bedienungsanleitung Seite 2

Werbung

Battery Charger OSCP3024 30A 12V / 24V
Warnings**
DANGER! BE AWARE, LEAD-ACID BATTERIES GENERATE
EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION.
FOR THIS REASON, IT IS VERY IMPORTANT TO READ AND
FOLLOW THESE INSTRUCTIONS CAREFULLY, EACH TIME
YOU USE THE CHARGING EQUIPMENT.
WARNING! Modern vehicles contain extensive electronic systems.
You are required to check with the vehicle manufacturer, for any
specific instructions regarding the use of this type of equipment
on each vehicle.
Charge in a well-ventilated area.
DO NOT operate near flammable liquids or gases.
DO NOT touch the clamps together or allow to touch the chassis.
DO NOT connect the clamps via another metallic object.
DO NOT cross connect power leads from charger to battery.
Ensure positive (+/RED) is connected to positive
and negative (-/BLACK) is connected to negative.
DO NOT pull the cables or clamps from the battery terminals .
DO NOT pull or carry the charger by the power cable.
DO NOT pull the plug from the socket by the cable.
DO NOT use worn or damaged cables, plugs or clamps.
Any faulty item should be immediately repaired
or replaced by a qualified technician.
DO NOT use the charger for a task for which it is not designed.
DO NOT cover or obstruct the charger ventilation louvres or fan.
DO NOT at the same time charge batteries of different capacities
or discharge levels.
2

Werbung

loading