Goboservice DIVUM 50K Gebrauchsanweisung Seite 23

4. If the accessory is purchased together with the projector, the latter will already be configured to
work with it and then you can proceed directly to use it. In particular, the accessory is supplied
with a pre-configured scene that can be modified on each gobo position or, if you prefer, you can
proceed with the creation of a new scene, leaving in the list or deleting the pre-existing one.
Once the scene is open, for each gobo it will be possible to set:
-
the position of the gobo through two levels of adjustment (Angle and Fine Angle)
-
the Fade In and the Fade Out for each gobo position, i.e. define the luminous intensity of the
projection at the time of entry or exit of the selected gobo position
-
the time spent by the current position in terms of h / m / s (Duration)
-
whether or not the position must rotate on itself (Rotation).
At the end of the configuration of the gobo position, click on Done to confirm the changes made.
Make sure you have the 'Live mode' active, otherwise the changes you are making on the gobo position
are not visible in real time.
If in the current scene you want to work not with 4 positions but with 3 or 2, it is possible to do so by
eliminating one or more positions. It is also possible to add the repetition of one or more gobos in the
scene; the order in which the different gobo positions are inserted in the list will be the one followed in
projection.
-23-
WWW.GOBOSERVICE.COM Ist0006 – Rev.0