Inhaltsverzeichnis
Werbung
Important information about your carport
We are pleased that you have chosen a product from SKAN HOLZ.
Please check the completeness of the kit using the item lists in good time before starting assembly or before
commissioning the assembly team.
If an individual part has defects or is missing, we will deliver it as quickly as possible.
We cannot reimburse the costs for any resulting delays in assembly by an assembly company.
We guarantee your product for a period of five years in accordance with our guarantee promise.
(see attachment or www.skanholz.com).
Please understand that we cannot accept any warranty for the following defects:
- incorrect storage prior to installation
- improper anchoring to the ground or insufficient foundation (see statics)
- damage due to assembly errors
- Damage due to higher snow loads than statically intended
- storm damage (insurance claims) or violent destruction
- Damage to constructions altered on site
- natural cracking, knotholes, twisting, changes in colour or similar changes
(natural process; has no influence on the statics)
Storage instructions until assembly:
- Store or stack material level and dry!
- Protect from sunlight and weather!
Wood can warp considerably when loose!
Care instructions:
The wood has already received an initial treatment with a water-based dip impregnation!
Please refer to the attached information sheet 'Care instructions / Colour treatment' for this.
General tips and notes:
-
Foundation according to statics (not included in delivery):
Concrete C25/30, reinforcing steel 500 (M), concrete cover 5cm, 3 ∅ 12 crosswise under each support.
-
The carports are intended for mounting on post anchors. ( Included in delivery ! )
-
Fastening material used on site must meet the static requirements of your carport.
-
The roof is not designed for walking on. The roof may only be accessed with a running board with a width of at
least 50cm (not included in the scope of delivery) and only in the area of the rafters.
-
Always ensure the same dimensions when assembling the gable triangles. Use the initially mounted gable
triangle as a template.
-
Also use the waste wood that accumulates when veneering both of the outer gable triangles.
-
Make sure that the bitumen roof shingles are adequately fixed with the roof nails.
The shingles stick together under exposure to intense sunlight.
-
When putting on certain roof coverings, e.g. panels, always observe the information from the
manufacturer.
-
In the overall width of the carport, the optionally available gutters are taken into account.
© SKAN HOLZ Europe GmbH – Im Alten Dorfe 10 – D-21227 Bendestorf – www.skanholz.com – Technische Änderungen vorbehalten. Stand 11/21
Werbung
Inhaltsverzeichnis
