SOLIS BBL290BKSANZ Bedienungsanleitung Seite 34

s BLENDING WITH THE
TO-GO BLENDER CUP
1. Unscrew the blade base from the cup and turn the cup upside down, so that
the opening points upwards.
2. Fill the ingredients into the blender cup and, in any case, pay close attention to
the MAX marking (500 ml). Under no circumstances exceed this marking.
3. Screw the blade base firmly back onto the blender cup in a clockwise motion.
The blade base has to be screwed all the way in so that none of the content can
escape.
4. Insert the blender cup with the blade base pointing down into the motor base.
The arrow on the blade base should align with the arrow saying „ALIGN" on
the motor base.
5. Then, turn the cup clockwisely until the arrow on the blade base aligns with
„BLEND". You can hear the blade base lock into place.
6. Plug the power plug into a suitable power outlet.
7. Set the turn-switch to the desired speed and blend for a maximum of 60 sec-
onds, then let the motor cool down for 2 minutes.
8. When the blending process is finished, set the turn-switch to OFF. Wait for the
blades and the motor to come to a full standstill and pull the power plug. Turn
the arrow on the blade base back to „ALIGN" and remove the cup from the
motor base. Turn the cup upside down and wait for the contents to run off the
blades and into the cup. Then, unscrew the blade base from the cup in a counter
clockwise motion.
9. If you want to drink the beverage directly from the cup or take it with you,
screw the drinking lid onto the cup. You can comfortably drink from the sealable
drinking opening.
•
If the blender is not in use or before it is disassembled, cleaned or stored, it
always has to be unplugged.
66
s TIPS FOR PERFECT BLENDING IN THE
TO-GO BLENDER CUP
• IMPORTANT: Never blend hot or warm contents in the blender cup. Never
blend carbonated liquids, as the gas cannot escape the closed container.
• We recommend blending for a maximum of 1 minute. The ingredients in the
blender cup can warm up and put pressure on the gaskets, making it difficult
to reopen the cup resp. making the contents splash out. Let the mixture cool
down first if it has warmed up and be careful when opening the cup.
• Always blend ingredients combined with liquids. Should the ingredients not
circulate in the cup, add a little more liquid to the cup.
• Should the mixture not be spread out evenly, try using less solid foods or more
liquid or processing smaller amounts per session.
•
Only blend as long as necessary – generally, do not blend too long.
• Use the PULSE function when processing foods with a solid consistency.
• Never exceed the MAX marking in the blender cup (500 ml).
• You can process a maximum of 3 ice cubes (classic size ice cubes from a stand-
ard ice cube tray) in the blender cup. This also applies to frozen fruit. Cut the
fruit into cubes which correspond to the size of ice cubes before freezing them.
•
Should you notice moisture or liquid on the upper part of the motor base during
blending, immediately switch the appliance off with the turn-switch (OFF posi-
tion) and pull the plug. Wait for the blades to come to a full standstill. Unscrew
the blender cup and check if the blade base had been correctly screwed on.
Wipe the motor base dry with a dry rag or paper towel immediately.
67