Werbung
Verfügbare Sprachen
Verfügbare Sprachen
11. Mount on the left-side of the vehicle the air spring
to the longitudinal member.
If there is a fuel cooler mounted, put the fi ller
plate 2 mm (with notches) (B) between the upper
air spring bracket (C) and the fuel cooler.
If there is no fuel cooler mounted, put the fi ller
plate 5 mm (B) between the upper air spring
bracket (C) and the longitudinal member.
Don't thighten the bold yet.
The fi ller plate
should be
mounted upright.
1x Bolt M8x30
1x Washer M8
RANGER T7
12. Mount on both sides of the vehicle the lower air
spring plate (E) to the lower air spring bracket (F).
4x Lock nut M8
Nm
4x Washer M8
13 Nm
EURO 5
left
EURO 6
2 mm
5 mm
left
RANGER T7
26
730155061720
V3.2
Werbung
