Description And Assembly Istructions; Intended Use - Lavorwash CLEAN4SWIM Bedienungsanleitung

Translation of the original instructions

DESCRIPTION AND ASSEMBLY ISTRUCTIONS

①②③④⑤
see fig.
A Motor head
B Switch
C Drainpipe (waste water)
D Filter (waste water)
E FIlter (dry suction)
F Stopper for tank
G Latches for closing head/tank
H
Vacuum connection

INTENDED USE

• The appliance is intended for non professional
use.
This appliance is suitable for commercial use, for
example in hotels, schools, hospitals, factories,
shops, offi ces and rental bussinesses
• The machine can be used for cleaning pool
bottoms.
• Removes and collects deposits from the pool
bottom, such as algae, leaves, hair, etc.
• The appliance is intended for use as a wet and
dry vacuum cleaner.
THECNICAL DATA
(see thecnical data plate)
SYMBOLS
CAUTION! It is important to be careful
on safety grounds.
IMPORTANT
IF PRESENT
Double insulated (IF PRESENT):
supplementary insulation is applied to
the basic insulation to protect against
electric shock in the event of failure of
the basic insulation.
I
Tank
L
Flexible hose (for powders/liquids)
M
Extension tube (for powders/liquids)
N
Accessory holder/carpet accessory
O
Cleaner nozzle (pool cleaning)
P
Brush accessory (pool cleaning)
Q
Handle with air control valve
R
Filter (wet cleaner)
RR Filter-retaining disc
S
Flat lance (for powders/liquids)
SAFETY
GENERAL WARNING
•Components used in packaging (if plastic bags)
can be dangerous keep away from children
and animals.
•The use of this machine for anything not
specified in this manual may be dangerous and
must be avoided.
•Before emptying the tank, switch off the
machine and disconnect the plug from the
power outlet.
•Always check the appliance before use.
•The suction nozzle should be kept away from
the body, especially delicate areas such as the
eyes, ears and mouth.
•Never allow children to play with electrical
appliances without adult supervision.
•The equipment should be correctly assembled
before use.
•Ensure that power sockets used ore correct for
the machine.
•Never grasp the mains plug with wet hands.
•Check the voltage indicated on the rating
plate is the same as the supply voltage.
•Never leave the equipment unattended whilst
in use.
•Never carry out any maintenance on the
machine without first disconnecting from the
mains supply or when it is left unattended or
reachable by children or disables.
•The mains supply cable should not be used to
pull or lift the machine.
•The machine should never be emersed in water
or a pressure jet of water used for cleaning.
•When using the machine in wet rooms (e.g.
9