Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Step 4:
Please fill in some coolant into the bowl. Switch on the ATX PSU and use the shot
to fill the pump step for step. Please open the screw at the top of the pump to fill
up.
Step 5:
Initial noises from the pump are quiet normal and will stop after filling up the
system completely. If there are problems with the circulation of the coolant please
shake the pump carefully.
Step 6:
In order to get out the air bubbles inside the radiator, you need to shake the
radiator gently as well. Please test the pump for a minimum of 1 – 2 hours before
closing the case.
Please check all connectors and cables before you turn on your Computer.
All manuals and user guides at all-guides.com
The installation is now completed !
18
Werbung
Inhaltsverzeichnis
