Input Source; Auto Tuning - Reflexion LEDW190 Bedienungsanleitung

CHANNEL MENU (DVB-C / T / T2HD)

Input Source

1. Select the menu item "Receive Source" and press the [OK] key.
2. Use the [▲ / ▼] buttons to choose between "DVB-T" (aerial)
and "DVB-C" (cable).
3. Confirm with the [OK] key to select the respective "Reception
source".
4. You will now return to the station menu.
DVB-T: Select DVB-T to enter the Antenna Settings menu.
DVB-C: Select DVB-C to enter the cable setup menu.

Auto Tuning

1. Select the menu item "Automatic station
search" and press the [OK] key.
2. Use the [▲ ▼ ◄►] buttons to select the
various setting options.
3. Confirm the entry with the [OK] key.
4. The search starts.
5. To pause the station search, press the
[EXIT] key.
The following setting options and menu items
are available:
DVB-C Auto Tuning
Tune Type:
Scan Type:
Netzwork ID:
Frequency:
Symbol (ks/s):
Sorting by LCN:
DVB-T Auto Tuning
Tune Type:
Scan Type:
Netzwork ID:
Frequency:
Symbol (ks/s):
Sorting by LCN:
Note:

The Network ID / Frequency / Icon (ks / s) settings are only available for DVB-C.

Manual entry will only be experienced by users.
DTV / ATV
Full / Network
Scan
The menu item is only active if network search is selected.
The menu item is only active if network search is selected.
The menu item is only active if network search is selected.
On / Off (Turn the option off because otherwise the station
sorting will not work).
DTV / ATV
The menu item is fixed and can not be edited.
The menu item is fixed and can not be edited.
The menu item is fixed and can not be edited.
The menu item is fixed and can not be edited.
On / Off (Turn the option off because otherwise the station
sorting will not work).