Programming A Privileged User Key - Hafele EFL 30 Betriebsanleitung

6.2 Programming a privileged user key

Prerequisites:
1. Hold the programming key card in front of the
antenna.

Acoustic signal is heard. LED flashes green
for max. 5 seconds.
3. Hold the user key in front of the antenna during
the 5-second period.

Acoustic signal is heard. LED briefly
illuminates green.

Locking authorisation is allocated.
5. Hold another user key in front of the antenna
during the 5-second period.

Acoustic signal is heard. LED briefly
illuminates green.

Locking authorisation is allocated.
6. Repeat steps 3 to 5 until all necessary user keys have been granted the locking authorisation.
7. The LED switches to red once the 5 seconds have elapsed.
50
Tag-it ™ISO
Programming key card
5 s
1 s
1 s
User keys
2. Hold the programming key card in front of the
antenna again during this 5-second period.

Acoustic signal is heard twice. LED flashes
green more slowly.
4. Remove user key.

LED continues to flash green slowly.
2x 2x/s
2x/s