Before Starting - SmartGyro RAPTOR Bedienungsanleitung

Important:
1. This guide provides knowledge to install the alarm on the
smartGyro raptor electric scooter, please pay attention to the
safety instructions and be responsible with the use of this electric
vehicle.
2. This scooter and all its components comply with all European
safety regulations, but we recommend that you use protections
and ride responsibly.
3. The installation of the alarm is a comfortable and simple pro-
cess, but even so, you must take extreme precautions in its insta-
llation. Please pay attention to the point of "Before you start"
4. You can contact us through info@smartgyro.es
WARRANTY.
This product has a two-year warranty, check the complete condi-
tions on our website www.smartgyro.es

Before starting:

1. It is essential to turn off the skate completely, with the charger
disconnected from the power.
2. If you have used the skid, please turn it off and wait for a certain
time to install the alarm. Ideally, this time should be more than 2
hours, so you will ensure that the battery and other components
are not at a high temperature.
3. The connection system is by means of a terminal. It is not
necessary to section any cables for its installation. That would
invalidate the warranty.
4. To make the connections, it is convenient to use latex gloves to
avoid static electricity.
EN
English
7