Motion Detector; Package Contents; Safety Instructions - Renkforce 1296294 Bedienungsanleitung

G Operating instructions
180° Motion detector
Item no. 1296294
Indented use
The motion detector's integrated PIR sensor responds to temperature changes within
the detection range, e.g. when a person enters the detection range.
Thus, the motion detector is used for monitoring entrances, garage driveways, stairs
or the like. Using the output of the motion detector, for example, a light can be control-
led. Observe the maximum connected load in the chapter "Technical data".
The product may be installed and used in indoor and outdoor areas (safety class IP44).
Always observe the safety instructions included in these operating instructions.
Please read the operating instructions carefully and keep them.
Any use other than the one described above could lead to damage to this product and
present a hazard of short circuits, fire, electric shock, etc. No part of the product may
be modified or converted!
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owners. All
rights reserved.

Package contents

• Motion detector

• Operating instructions
Explanation of symbols, inscriptions
The lightning symbol inside a triangle is a warning to inform you of potential
risks of personal injury, such as electric shock.
This symbol indicates specific risks associated with handling, operation or
use.
The "arrow" symbol indicates special tips and operating information.
Observe the operating instructions!

Safety instructions

Read the complete operating instructions carefully before using the prod-
uct, as they contain important information about proper installation and
operation.
Damage due to not following these operating instructions will void the
warranty! We do not assume any liability for any resulting damage!
Warning!
The product may be installed only by a qualified technician (electrician)
who is familiar with the relevant regulations (e.g., VDE, German electrical
wiring regulations)!
Improper work carried out on the mains voltage endangers not only your
own life but also the life of others!
If you do not have the expertise required for the installation, do not install it
yourself but ask a qualified technician.
• Unauthorised conversion and/or modification of the product is not al-
lowed for safety and approval reasons (CE).
• The product is not a toy and does not belong in the hands of children!
There is danger of a life-threatening electric shock!
• The product may only be operated on the mains voltage (see section
"Technical data"). Never try to operate the product at another voltage, as
this will result in destruction of the product.
• During installation, all poles must be disconnected from the mains voltage
(e.g., via RCD).
• The product may be mounted in indoor and outdoor areas (protection
class IP44, splash-proof). Pay attention to the correct operating position
during installation (see "Installation and connection").
• Only install and use the product when it is firmly mounted.
• Do not use this product in rooms that are under adverse environmen-
tal conditions where combustible gases, vapours or dust are or may be
present! There is a risk of explosion!
• The product must not be exposed to extreme temperatures, strong vibra-
tions or heavy mechanical stress.
• If it can be assumed that safe operation is no longer possible, the device
must be turned off and precautions must be taken to ensure that it is not
used unintentionally. After this, arrange for an expert to check the product.
Safe operation can no longer be assumed if:
- the product shows visible signs of damage
- the product does not work at all or works poorly (where there is flicker-
ing light, leaking smoke or a smell of burning, audible crackling noises,
or discolouration of the product or to adjacent surfaces)
- the product was stored for a longer period of time in unfavourable condi-
tions
- it was exposed to heavy loads during transport
• Do not leave packaging material carelessly lying around, since it could
become a dangerous plaything for children.
• In commercial institutions, the accident prevention regulations of the Em-
ployer's Liability Insurance Association for Electrical Systems and Operat-
ing Facilities are to be observed!
• If you have any questions that are not answered in these operating in-
structions, please contact our technical service or another specialist.
Function of the motion detector
The motion detector integrated in the radio motion detector responds to temperature
changes within the detection range, e.g. if a person or an animal with a temperature
different from the background enters the detection area.
The range for detecting motion is determined by several factors:
• The motion detector's mounting height
• The temperature difference between the moving object and the background (ambient)
• The size of the object
• The distance of the object from the motion detector
• The direction and speed of movement
• Ambient temperature
The detection range can be restricted by covering the curved diffusion panel of the
motion detector with an opaque cover such as a strip of black insulating tape.
After switching on the mains voltage, it takes a few seconds until the PIR sensor in
the motion detector has adjusted itself to the background temperature and is able to
recognise changes in temperature within the detection area.
Controls & connections
6
7
8
9
10
1 Screw for mounting the cover
2 Cover
3 Screw terminals
4 Label for pin assignment of the screw terminals
5 Cable relief for fixing the cable
6 Locking screw
7 Dial "LUX" (brightness setting)
8 Dial "TIME" (power-up time)
9 Dial "SENS" (sensitivity)
10 Rubber seal for cable gland
11 Mounting holes for wall assembly
1
3
4
2
5
11
11