Deleting Images And Videos; Transferring Photos And Videos To A Computer - TOOLCRAFT Digimicro LAB 3.0 Bedienungsanleitung

11.8 Deleting images and videos

Deleting one image or video
1
1. On the remote control, press the playback button
mode.
2. Press the menu buttons ▲ and ▼to select the image or video you want to
delete.
3. Press the menu button
menu buttons ▲ and ▼.
4. Press the menu button OK and follow the on-screen instructions to delete the
image or video.
Deleting all images and videos
2
1. On the remote control, press the playback button
mode.
2. Press the menu button
buttons ▲ and ▼.
3. Press the menu button OK and follow the on-screen instructions to delete all
images and videos.

11.9 Transferring photos and videos to a computer

Connect the microscope to a computer to transfer captured images and videos from
the microSD card to the computer.
1. Connect the USB cable to the microscope and the other end to a USB port on
the computer.
2. Switch the microscope on.
The microSD card shows up as a drive on the computer.
Æ
3. Transfer images and videos to the computer.
4. After the transfer is complete, remove the drive through the operating system
and then remove the USB cable from the computer.
38
and select the entry Delete Current with the
and select the entry Delete All with the menu
to activate the viewing
to activate the viewing