Fitting Instructions; Important Information - Ofa Bamberg dynamics Bedienungsanleitung

Important information

Ankle Support
Introduction
Dear user, we are delighted that you have
chosen an Ofa Bamberg product and we
want to thank you for putting your trust
in us. Please take a moment to read this
product information through carefully to
ensure your Dynamics product works as
effectively as possible.
Ofa Bamberg wishes you a speedy
recovery!
←

Fitting instructions

The pictures that go with the fitting instructions
can be found on the inside cover (2) at the start
of the brochure.
1
Pull the stitched end of the support over the foot with
the longitudinal seam pointing backwards.
2
The support is positioned correctly if the silicone
padding surrounds the ankle from below.
Intended Use
The Dynamics Ankle Support stabilises
the ankle joint with its compressive effect.
The integrated silicone pads on the inside
and outside of the ankle help to reduce
swelling.
Important information
– The initial fitting and adjustment of the product
as well as instructions on its proper and safe use
should be provided by trained medical/orthopaedic
specialists.
– The product should only be used for the indications
in the adjacent column.
– Ensure that the product is fitted correctly. Check
the product to ensure it is working and check it
for wear and damage (such as breaks, cracks or
distortion) before each use. Do not use a product that
is damaged.
– Wear the product directly on the skin. It should
only be worn over intact skin. If it is to be worn in
combination with other products, please discuss this
with your doctor first.
– Unless otherwise prescribed, the product should
be removed during long periods of rest (e.g. when
sleeping).
– If you experience an unpleasant sensation, severe pain
or other symptoms while wearing the product, remove
it and contact your doctor or specialist supplier.
– We use a comprehensive quality assurance system
to check our products. If you have any complaints,
however, please contact your specialist supplier.