Herunterladen Inhalt Inhalt Diese Seite drucken

Charging The Battery; Recharging The Battery - Grizzly AKS 2440 Lion Set Originalbetriebsanleitung

Akku-kettensäge
Vorschau ausblenden Andere Handbücher für AKS 2440 Lion Set:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
GB
2. Wipe off any spilled oil and close
the cap again.
Always switch off the device and
allow the motor to cool before
filling with chain oil. There is a
risk of fire if oil overflows.

Charging the battery

It is recommended that the device
be used with a 24 V battery (4 Ah.
Do not expose the battery to
extreme conditions such as heat
or impact. Risk of injury from
escaping electrolytic solution!
After eye/skin contact, rinse the
affected areas with water or a
neutraliser and consult a doctor.
Charge the battery in a dry room
only. Prior to attaching the charger,
check that the battery's outer sur-
face is clean and dry.
There is a risk of injury due to elec-
tric shock.
Only use the original charger from
the package to charge the battery.
Mind not to charge the appliance
for more than 8 hours at a time. If
you do, the battery and the appli-
ance may be damaged and longer
charging times would be a waste
of energy. Excessive charging will
void the warranty.
Charge the battery before the first
time of use. Do not briefly charge
the battery several time in a row.
Recharge the battery when you
notice that the appliance is becom-
ing slower.
154
All manuals and user guides at all-guides.com
If a fully recharged battery lasts
for considerably shorter operating
times, the battery is used up and
needs to be replaced. Only use an
OEM spare battery available from
our Customer Service.
Always take heed of the applicable
safety instructions as well as the
environmental protection regula-
tions and information.
The warranty excludes all defects
caused by improper handling.
Do not insert the battery until
the appliance is fully assembled.
Risk of injury!

Recharging the battery

Allow a freshly charged battery
(19) to cool down for approx. 15
minutes before inserting it into the
battery charger (20).
E
1. Remove the battery (19) from
the appliance, as necessary.
2. Inser the battery (19) in the
charging compartment of the
battery charger (20). It will audi-
bly snap in.
3. Plug the battery charger (20)
into a mains outlet. The charg-
ing indicator (20a) lights up:
Red: Equipment charging.
Green: Charging finished.
The recommended charging
time is approx. 7-9 hours.
4. When the battery is fully re-
charged unplug the battery
charger (20) from the mains.
5. Press the release button (19a) on
the battery (19) and pull the bat-
tery out of the battery charger
(20).

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis