Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.4. Test Strip
Run water
Keep the
through the
strip in the
tap (1min.)
water (1sec)
NOTE: The level is set to 3 as default. If the water is well water or has a hardness level
above 90 dF, we recommend that you use filter and refinement devices.
4.5. Water Hardness Table
Level
German dH
1
0-5
2
6-11
3
12-17
4
18-22
5
23-31
6
32-50
4.6. Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness in the
mains water supply. To find out the hardness level of your tap water, contact your water
company or use a test strip (if available).
4.7. Setting
In order to change the salt level, follow the below steps:
•
Turn the knob to the "off" position.
•
Push the "Start/Pause" button and hold it down.
•
Turn the knob clockwise one step.
•
Hold down the "Start/Pause" button until the LEDs flash and "SL" disappears.
•
The machine will display the last setting.
•
Set the level by pushing the "+" and "-" buttons.
•
Turn the knob to the "off" position to save the setting.
4.8. Detergent usage
Only use detergents specifically designed for domestic dishwashers. Keep your detergents
in cool, dry places out of reach of children.
Add the proper detergent for the selected program to ensure the best performance. The
amount of detergent needed depends on the cycle, load size, and soil level of dishes.
Shake the
strip.
French
British
dF
dE
0-9
0-6
10-20
7-14
21-30
15-21
31-40
22-28
41-55
29-39
56-90
40-63
EN - 13
Wait
Set the hardness level of
(1min.)
your machine.
1
2
3
4
5
6
Indicator
L1 is shown on the display.
L2 is shown on the display.
L3 is shown on the display.
L4 is shown on the display.
L5 is shown on the display.
L6 is shown on the display.
Werbung
Inhaltsverzeichnis
