Philips AC4072 Benutzerhandbuch Seite 8

English
6
2
1
2 Take out the new filter from the packaging material.
3 Put filter 2 (Multi-layer filter) back into the appliance.
Note: Make sure that the side with the tag is pointing towards you.
4 Place filter 1 (pre-filter) in the appliance.
Note: Make sure that the side with the two projections is pointing towards you.
Note: Make sure that all hooks are properly attached to the appliance.
5 To reattach the front panel, insert the bottom hooks into the bottom
of the appliance first (1). Then push the panel against the body of the
appliance (2).