How To Clean; Cleaning The Body - Uspa UB-6035R Bedienungsanleitung

7 How to clean

Nozzle cleaning
Make sure the occupied sensor is not activated
(not sitting on the seat or not place hands on the seat sensor part).
Press "Cleaning" button, posterior nozzle comes out.
Press this button again, feminine nozzle comes out.
Press "Stop" and nozzles will return to stand-by mode.
(for UB-6035R, UB-6135R)
Press "FR" button, posterior nozzle comes out.
Press "BK" button, feminine nozzle comes out.
(for UB-6235, UB-6220, UB6-210, UB-6335, UB-6310)
Do not forcefully push or pull the nozzles, or bend them.
Use a toothbrush or soft cloth to clean nozzles.
Press "Stop", "FR", "BK" and nozzles will return to stand-by mode.
For extended period of time cleaning, unplug for safety.
Do not retract nozzles without a nozzle tip. It may result in malfunction.
Beware of lost tips and changes. Beware of losing or switching nozzle tips.
Strainer maintenance
(1/2'', 3/8'')
T-valve

Cleaning the body

Regularly wipe off the body with a dry soft or sponge, or dampen with neutral detergent.
Release the lid.
1. Pull left and up the left hinge part.
2. Release the right hinge part (be aware your fingers not to be caught).
For care of plastic body, do not use any cleansers which are not safe to use
on toilet seats
(toilet cleanser, home cleanser, bleach, benzene, paint thinner, cresol etc.).
14
Do not forcefully push or pull the nozzles, or bend them. It may result in failure.
Make sure to use "Cleaning" button on the remote control.
Caution
This appliance will not operate properly if the strainer is clogged.
Be sure to clean the strainer regularly.
Water tank
Water hose
Shutoff valve
Toilet cleanser Thinner Bugs killer
Benzene
Strainer
Close the shutoff valve by turning clockwise.
Unscrew the nut.
Clean the strainer with a small brush.
Rescrew the nut.
Open the shutoff valve by turning counter clockwise.
Sand paper
posterior
feminine
feminine posterior