Herunterladen Diese Seite drucken

ZALMAN RESERATOR 3 MAX Bedienungsanleitung Seite 23

Vorschau ausblenden Andere Handbücher für RESERATOR 3 MAX:

Werbung

Peel off one side of the Double-sided Tape and attach it with the sticky side facing the Loading block. Then, peel
off the top cover.
Auf der einbauten Trägerplatte das Klebeband aufkleben und dessen Schutzfolie entfernen.
Double-sided tape
Scotch double face
Doppelseitiger Klebeband
Cinta de doble lados
Caution / Attention / Vorsicht / precaución
Please note that the sticky side of the Loading Block serves to attach the
Loading Block to the backplate.
Die Einbaurichtung der Trägerplatte beachten.
Attach the Backplate assembly to the back side of the
motherboard by aligning the Nuts to the motherboard
may continue with the installation without the Double-sided
Tape as it is not a necessary component.
tentative, vous pouvez continuer avec l'installation sans le
Die Rückplatte mit der Aufnahmebohrung von der Hauptplatine
zentrieren und auf der Rückseite der Platine aufkleben.
Fije la placa de atrás a la parte tracera del tablero principal
alineando el agujero de montaje de garpas del tablero principal.
Apply the thermal grease provided on the CPU surface, and then use the silver bolt B (3mm) to install the
water block.
Schrauben B (3mm) befestigen.
agua con el perno plateado(3mm).
.COM
O
Socket 775
Socket 1156/1155/1150
Socket 2011/1366
8

Werbung

loading