Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3 Setting up the YOUVI door station module
To set up the door station module, proceed as follows:
1.
Open the YOUVI Configuration Dashboard page via the desktop shortcut or the green
house in the taskbar.
−
You can also reach the configuration page on your browser, as long as you are in the
same network as the PEAKnx touch panel. To do this, enter the following URL in your
browser:
−
http://x.x.x.x:31228 or http://x.x.x.x:31226, where x.x.x.x must be replaced by the local IP
address of your PEAKnx touch panel. This is shown to you in the server overview:
2.
Go to "Install Door intercom".
3.
Under More > License, you can view the remaining days of your trial license.
4.
For unlimited use, please purchase the module in the PEAKnx Shop.
5.
Select the Door intercom icon on the Dashboard page to open the settings.
6.
Add a new door station via the "+" symbol.
7.
Intercom name: This name appears as a label in the upper left corner of the widget.
8.
Username: Enter the name that you have assigned in your Fritzbox/Tek-SIP-Software for the
touch panel with YOUVI, e.g. "Controlmini". You can also find your credentials under fritz.
box > Telephony Devices if you edit the created PEAKnx Panel (IP Phone) and go to the tab
"Login data."
9.
Password: Enter the password associated with the user name here.
10.
SIP Server IP Address: Enter the IP address of your SIP server/fritzbox here.
11.
Camera Stream: Enter the link of the camera stream from your door station here:
21
Werbung
Inhaltsverzeichnis
