Option 2: Setting Up The Sip Clients In Teksip - PEAKnx DoorBird Connect Kurzanleitung

1 SIP server configuration
number" and enter the phone number "** xxx" of the PEAKnx Panel in the Fritzbox. In this
example, that would be the "** 627".
13. You will get an overview, which you can confirm with "Apply".

1.2 Option 2: Setting up the SIP clients in TekSIP.

1. Install Kaplansoft's TekSIP software on a panel in the network and launch TekSIP Manager.
2. Select the "Extensions" tab.
3. Enter a username and password for the panel using YOUVI.
4. In the drop-down menu on the far right, select "Yes" for "Enabled" to activate the account.
5. Press the plus at the end of the line to create the user.
6. Proceed in the same way for the door station. Make sure not to use umlauts or special
characters:
7. In Settings > Service Parameters, place a check mark next to "Use TCP for large UDP
packets":
17