Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2 Setting up the Doorbird IP Video door station
Numbers of your preference with which you can control the door relay and the built-in light
function of your DoorBird IP Video door station from the VoIP Software App or YOUVI. If
you use VoIP software, enter the number combination on the number field after accepting
the call.
5.
Toggle the "Allow incoming calls"-switch on, and tap "Allowed SIP Users". In the subsequent
screen, tap "+".
6.
Enter the the following:
−
5005@x.x.x.x
−
Where 5005 is the SIP-ID of the PEAKnx touch panel (as assigned in the Fritzbox/Tek-SIP,
e.g. "Controlmini") and x.x.x.x represents the IP address or URL of your PBX Proxy, e.g.
fritz.box.
−
Hit "OK".
7.
Go back and click save.
8.
Go back to the main administration area and tap on "SIP Calls", then tap "Add".
9.
In the subsequent screen, enter an arbitrary name in the "Name" field, e.g. "YOUVI". For the
SIP-address, enter:
−
5005@x.x.x.x
−
where "5005" is replaced by the user name of the YOUVI software in Tek-SIP.
−
In case of Fritzbox, "5005" is replaced by the internal phone number, e.g. **627.
−
x.x.x is replaced by the IP address or URL of your PBX proxy, e.g. fritz.box in case of
Fritzbox.
10.
Click Save.
19
Werbung
Inhaltsverzeichnis
