Lindemann musicbook COMBO Bedienungsanleitung Seite 26

26 EN
SET-UP
Bluetooth operation
The musicbook COMBO has a Bluetooth function which en-
ables wireless music play back from e.g. smartphones or
Bluetooth
tablets over the network player.
For a Bluetooth audio transfer from a mobile device to the music-
book, the mobile device must support the A2DP Bluetooth audio
transfer protocol. To connect the mobile device to the network player,
The musicbook COMBO supports "TIDAL Connect", a feature that
enables TIDAL users to play their favorite music seamlessly from
the cloud via the TIDAL app. For more information please go to
www.tidal.com/connect.
How to use TIDAL Connect:
1. Open up the TIDAL app on your phone, tablet or laptop
using the same network.
2. Play a song and tap on the „Now Playing" bar.
3. Tap on the device selector at the top right.
4. Select the musicbook
COMBO and start listening!
select "Bluetooth" in the app. Now open "Settings" and "Bluetooth" on
the mobile device and establish a connection by clicking on the music-
book there. The LINDEMANN app may be closed now.
USB operation
The musicbook COMBO can play back music
USB
from USB storage media. For this purpose the
device is equipped with a rear USB host port. The memory can be for-
matted using one of the following file systems: FAT32, NTFS, ext3 or
ext4. The voltage for the USB storage medium can be supplied via the
USB port unless the power consumption of the device will not exceed
1.5 A. Standard 2.5" USB harddisks may be connected there without
the need for a separate power supply. The USB host port may also be
used to charge smartphones.
A special feature is the possibility to run an external CD-ROM drive
(e.g. Apple Superdrive) on this connection: after docking the drive, a CD
playback menu will pop up in the app which allows to use the music-
book as a CD player.

Top