Nordic Home FT-775 Bedienungsanleitung Seite 3

Charge
1. Plug the USB-A to USB-C cable into a matching USB port.
2. Voltage should be 5 V DC.
Flashing LED = charging.
Static LED = fully charged.
When battery is low the LED will flash and the fan speed will be lowered,
and eventually the fan will turn itself off.
Use
1.To turn on or off press the knob (like a button).
2. To change the fan speed, rotate the knob.
Clockwise rotation increases fan speed.
Anticlockwise rotation decreases fan speed.
The LEDs above the above the knob will turn on and match the
corresponding speed.
The LEDs turn off when you decrease fan speed and turn the product off.
3. Press the oscillation button to start or stop swinging motion.
4. You can adjust the angle of the fan up and down.
However, do not manually rotate the fan to the left or right, it will damage
the product. Instead use the oscillation button.
ENG
User Manual
3