Herunterladen Inhalt Inhalt Diese Seite drucken

Zusammenbau; Display Vorbereiten; Hubsäule Mit Der Entsprechenden Bodenvariante Montieren; Mit Sockel Für Boden- Wandmontage - Kindermann DisplayLift Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für DisplayLift:
Inhaltsverzeichnis

Werbung

2. Zusammenbau

- Assembling
Der DisplayLift wird in einzelnen, vormontierten Komponenten (siehe Lieferumfang) geliefert. Diese bitte in den Schritten wie unten
dargestellt und beschrieben montieren.
The DisplayLift is supplied in separate, pre-assembled components (see scope of delivery). Please mount them in the steps shown
and described below.

2.1. Display vorbereiten

Im Lieferumfang des Displays enthalten:
Included in the delivery of the display:
• Schrauben zur Montage der VESA-Traversen an das Display
• Screws for mounting the VESA traverses to the display
Legen Sie das Display für die Montage der VESA-
Traversen auf eine saubere und weiche Unterlage und
befestigen Sie diese mit den Befestigungsschrauben
(im Lieferferumfang des Displays enthalten).
Place the display on a clean and soft surface for
mounting the VESA traverses, therefore please use
the fixing screws (in scope of delivery of the display).
2.2 Hubsäule mit der entsprechenden Bodenvariante montieren
/ Mount the lifting pillar with the corresponding floor variant
2.2.1 Mit Sockel für Boden- Wandmontage
(Art.-Nr.
/ Ref.No.
4013 000200)
Im Lieferumfang enthalten /
• 4x Gewindefurchende Zylinderkopfschrauben M8x35
• 4x M8x35 thread-grooved cylinder head screws
• 4x Unterlegscheibe Ø 8,4
• 4x Washer Ø 8.4
• 2x Sechskantschraube M10x20
• 2x Hexagon head screw M10x20
Montagehinweis
- Mounting instructions:
!
Die Montagebeschläge vor der Sockelmontage wie gezeigt in das Profil
einschieben!
Before mounting the base, insert the mounting fittings into the profile!
Achtung
- Attention:
!
Bei der Variante Boden- Wandmontage ist darauf zu achten, dass
die Montagebeschläge mit Gewindebolzen in die rückseitige Nut der
Hubsäule ge schoben werden bevor der Sockel montiert wird.
With the floor- wallmount version, make sure that the mounting
brackets with threaded bolts are pushed into the rear groove of the
lifting column before the base is mounted.
4
DisplayLift elektrisch / DisplayLift electric
/ Preparing of display
/ With base Floor- Wallmount
Included in delivery:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

401300020040130001104013000201

Inhaltsverzeichnis