Description Of The Appliance - Hyundai VK 102 Bedienungsanleitung

– The kettle may not be used without the filter sieve.
– The stand is designed and intended only for power supply of the appliance, it is not permitted to
use it for another purpose.
– There must be water in the electric kettle before putting into operation. Do not fill the electric
kettle with water if it is on the stand.
– The electric kettle is intended for heating the maximum of 1,0 l of water. If the water level
exceeds the maximum recommended amount, hot water may be splashing out.
– Prevent injuries when handling (e.g. by hot water, steam).
– Do not touch outer surfaces during operation of the kettle, they are hot and there is a risk of
getting burned. Do not touch thel lid during and after cooking!
– If you are not going to use the electric kettle for longer time, we recommend unplugging the
stand from power supply by taking the fork of the power cord out of the socket.
– The appliance is equipped with the heat safety lock which disconnects power supply if the
steam sensor fails, if water boils away or if an empty kettle is turned on. If it happens, unplug the
appliance from power supply and let it cool down. Do not fill the kettle with cold water in order to
cool it down quickly. It could reduce life of the heating element.
– Before switching on the kettle ensure that the water level is between MIN and MAX marks
– It is not allowed to modify the surface of the appliance in any way (e.g. using a selfadhesive
wallpaper, foils, etc.)!
– Check the condition of the power cord of the appliance regularly.
– The power cord must not be damaged with sharp or hot objects, open fire and it must not be
sunk into water or bent over sharp edges. Never put it on hot surfaces or do not let it hang over
the edge of a table or work tables. Hitting, stumbling or pulling the power cord e.g. by children
can result in tilting over or drawing the appliance down and serious injury!
– If you need to use the extension cord, it has to be uncorrupted and it has to comply with the
valid standards.
– Never use the appliance for any other purpose than for the intended purpose described in these
instructions for use!
– The producer is not responsible for damage caused by improper use of the appliance
(e.g. burning, scalding, fire) and its guarantee for the appliance does not apply to situations
when the safety warnings above are not complied with.
II. DESCRIPTION OF THE APPLIANCE
A – electric kettle
A1 – off/on button 0/I (steam sensor switch*)
A2 – control light
A3 – water gauge
A4 – handle
B – removable stand
B1 – central connector
* The steam sensor ensures automatic switch off the appliance after reaching the boiling point.
III. INSTRUCTIONS FOR USE
Fill the kettle with clean cold water up to max., turn it on and let the water boil before first use.
Then Pour the water out and repeat the process several times (at least five times). You will boil
the kettle out properly this way and get rid of potential taste of plastic. If you feel like you have
aftertaste of plastic from boiled water, we recommend to repeat the procedure according to the
instructions in the paragraph MAINTENANCE – cleaning the kettle. Another recommendation is
to leave the empty kettle open for 24 hours. Plug the fork of the power cord to the electric socket.
Hold the kettle A on the handle A4. Open the lid A5 by pressing the lock button A6. Fill the kettle
with drinking water. The minimum and maximum amount of water is marked on the water gauge
A3. Close the lid by snapping.
A5 – lid
A6 – lid lock button (PUSH)
A7 – filtration sieve
B2 – power cord
18 / 31