Attaching / Removing Of The Printer Cover; Attaching / Removing Of The Design Cover - Anker Rk10 Betriebsanleitung

4.8. Attaching / removing the printer cover
1
Tilt the tablet case back (1) and place the prin-
ter cover against the base housing (2). The ma-
4
gnets hold the cover in place (3).
3
If you want to remove the printer cover, use the
provided grip opener to replace the printer cover
(4).
4.9. Attaching / removing design cover
Grasp the cover on the sides to avoid scrat-
ches. Place the cover on the basic housing. The
magnets hold the cover in place.
BETRIEBSANLEITUNG // OPERATING MANUAL page 43