Assembly Of The Printer - Anker Rk10 Betriebsanleitung

4.3. Assembly of the printer

If you have not already removed the display ad-
apter for mounting the display, do so now. The
display adapter also secures the printer used
in its position.
Before mounting an EPSON printer, make sure
that both the rear and the bottom cover of the
printer are removed. This is not necessary for
SEIKO models.
Then install the printer in the basic housing
and insert the customer display adapter (with
customer display, if applicable). Now screw
the customer display adapter back on and fix
the printer cover to the basic housing with the
magnets.
BETRIEBSANLEITUNG // OPERATING MANUAL page 37