Raco 12132 Bedienungsanleitung

TRAILER LIGHT TESTER 12132
User guide
12V 13-pol Socket
Cobo sockets
Use of Trailer Light Tester:
The Trailer light tester has main connection with a 2-metre main cable. Push the 3-pin plug
into the socket of the Trailer light tester. The socket has built-in slow glass fuse 2,5A
Test of trailer:
The Trailer light tester is, as standard equipped with sockets to 12V ISO 1185 and
2 Cobo sockets.
Insert the trailer plug into the desired socket on the Trailer light tester.
For the function You want to be tested, push down the black switch to the right, and the
LED will illuminate for the function concerned and indicate current for the trailer.
In the event of a short circuit, there is an integrated automatic fuse, connected to the
ISO1185 socket. Just press the button and continue the test.
For the Cobo sockets there are an electronic short circuit protection if the overall current
increase 24Amp. When the short circuit is disconnected, the voltage will be back again.
Test of trucks:
Plugin the cable from the truck into the wanted socket on the Trailer light tester.
Push down the black function switches to the left.
Activate the wanted functions from the driver´s seat and the LEDs for the function
concerned will light up.
Specifications:
110-240V AC 50/60 Hz. Output: 12V 320W DC (96 W for the 13-pin socket)
L: 320 x W: 225 x H: 130 mm. Weight 4.3 kg. Delivered with 2-meter power cable.
The pictures are illustrative and may vary from the originals.
Automatic fuse
230V Socket
Function switches
RACO A/S
Overgade 4
DK 6670 Holsted
Tlf. +45 69106680
E-mail: info@raco.dk
Web: www.raco.dk
Trailerlystester
12132
RACO A/S
Overgade 4
DK 6670 Holsted
Tlf. +45 69106680
E-mail: info@raco.dk
Web: www.raco.dk