Raco 12126 Bedienungsanleitung

TRAILER LIGHT TESTER 12126
User guide
24V 7-pol Socket 12V 7-pol Socket
Use of Trailer Light Tester:
The Trailer light tester has main connection with a 2-metre main cable. Push the 3-pin plug
into the socket of the Trailer light tester. The socket has built-in slow glass fuse 2A. Choose
12V or 24V by pressing the black top switch.
Test of trailer:
The Trailer light tester is, as standard equipped with sockets to 12V ISO 1724 and
24V ISO 1185.
Insert the trailer plug into the desired socket on the Trailer light tester.
For the function You want to be tested, push down the black switch to the right, and the
LED will illuminate for the function concerned and indicate current for the trailer.
In the event of a short circuit, there is an integrated automatic fuse, just press the
button and continue the test.
Test of trucks:
Plugin the cable from the truck into the wanted socket on the Trailer light tester.
Push down the black function switches to the left.
Activate the wanted functions from the driver´s seat and the LEDs for the function
concerned will light up.
Specifications:
230V AC 50 Hz. Effect: 24V 200W. Effect: 12V 100W. DC/DC direct current.
L: 300 x W: 225 x H: 130 mm. Weight 4.3 kg. Comes with 2 meter power cable.
Switch for 12V / 24V
Automatic fuse
230V Socket
Function switches
RACO A/S
Overgade 4
DK 6670 Holsted
Tlf. +45 69106680
E-mail: info@raco.dk
Web: www.raco.dk
Trailerlystester
12126
RACO A/S
Overgade 4
DK 6670 Holsted
Tlf. +45 69106680
E-mail: info@raco.dk
Web: www.raco.dk