SCANGRIP SUNMATCH 4 Bedienungsanleitung

SUNMATCH 4
03.5657
CCT SCAN - Stepless
USE
Activate the CCT SCAN
function to sweep stepless
in the interval from 2500K
to 6500K. At any point, the
CCT SCAN function can be
locked.
* go to scangrip.com to register
Ultra high CRI+
COB LED
Spot: High power LED
3.7V / 2600mAh
Li-ion
IK07
50-500 lm 700-1400
Spot: 200 lm lux@0.5m
Spot: 5000
lux@0.5m
2-20h
Spot: 3h
IP65 188x58x26mm
Stepless dimmer
10-100%
2500K-6500K
Spot: 4000K
4h -10° to +40° C
267g
To save battery and
avoid the risk of over-
heating an intelligent
built-in system switches
turn the lamp to low
mode after 3 minutes of
use at high mode.
CRI 96+
Spot: 95 CRI
1m
Included
USB cable
Charging input
5V DC 1A