HARTING Han Montageanleitung Seite 2

Han Pneumatic Double Module Metal
®
Assembly instructions
EN
HARTING Electric Stiftung & Co. KG, 32339 Espelkamp, Germany ·
Country specific contact data and local languages refer to www.HARTING.com
4. You can now install the completely assembled Pneumatic
double module in the Han-Modular
hinged frame and then put the module in its proper position.
▶ Make sure that the module's notches fit into the recesses of
the hinged frame.
5. After you have completely loaded the Han-Modular
Frame, close it by gently pressing on the outer sides of the
frame.
▶ Ensure that the notches of the the module fit precisely into the
recesses of the hinged frame.
6. Slide the Han-Modular
hood/housing.
▶ Make sure that the hoses are properly guided through the
cable gland.
Use the four fixing screws to mount the hinged frame in the
housing.
2
Hinged Frame. Open the
®
Hinged Frame into the
®
Hinged
®