Fm Radio - auna DABStep Bedienungsanleitung

EN
24
All manuals and user guides at all-guides.com

FM RADIO

Switch the device on and press MODE repeatedly to select FM mode:
Display
• The symbol in the upper right corner indicates the strength of the
received FM signal.
• Below the clock, the currently tuned in station is displayed by name. The
lower line is reserved for additional information received through the
FM / RDS signal.
Press < / >, to tune up/down in steps of 0.05 Hz. Press SCAN for scanning
the FM band up to the next found station.
Press and hold MENU/INFO on the device, or MENU on the RC, to launch
the FM menu. There are two additional items to the menu as when launched
from another mode:
Scan Setting: Set the sensitivity of the automatic scan, so either all staions
will be found and tuned in, or only stations emitting a stron signal will be
tuned in.
Audio Settings: Toggle MONO / STEREO reception here.
Station presets:
• Press the STAR button on the RC, or press and hold MENU/INFO to go
to the menu and select „Preset Store".
• Use < / >, to select the desired preset location and confi rm with OK/
SELECT. The station currently tuned in will be saved to the selected
preset.
• There are 10 presets available for each, FM and DAB radio stations.
• Press the STAR button on the RC, or press and hold MENU/INFO to go
to the menu and select „Preset Recall" to choose from previously saved
stations.
• The number buttons 1-10 on the RC can be used to directly tune in
stations previously saved to the corresponding presets.