Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Restoring factory settings
Hold down the single-cup and double-cup buttons simultaneously for 3 seconds to restore
the factory settings.
g) Auto power-off
1. If the appliance is not used within 29 minutes of pressing the power button, it will power off
automatically.
2. If the appliance is not used after 215 ml of water is pumped, the pump will stop automatically.
3. If the appliance is not used after frothing milk for 180 seconds, the pump will stop
automatically.
Care and cleaning
a) Cleaning
Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
Do not immerse the product in water.
1. Before cleaning the appliance, make sure that it is unplugged from the power supply and
has cooled down completely.
2. Clean the water tank, drip tray and drip plate of the coffee maker regularly with a moist
sponge, and dry before use. Clean the housing of the coffee maker with a dry cloth.
Note: Do not use alcohol or solvent cleaner to clean the appliance. Do not immerse the
housing in water or other liquids for cleaning.
3. Detach the metal funnel by turning it clockwise and remove the remaining coffee residue
before cleaning with a cleanser. Then rinse and dry thoroughly before use.
4. Clean all attachments in water and dry thoroughly before use.
b) Descaling
To make sure your coffee maker operates efficiently, the internal piping should be cleaned,
descaled and maintained regularly. The descaling warning will be shown when the appliance
has been used for 500 cycles. This is indicated by all indicators flashing 5 times in unison. If it is
not cancelled, the descaling warning will be shown each time when you turn on the appliance.
1. Fill the water tank with a water and descaler solution (usually to a ratio of 4:1 or as specified
by the instructions) to the MAX level. Use a household descaler. Alternatively, citric acid
(available from a chemist or drug store) can be used instead of descaler (to a ratio of
100:3 water to citric acid).
2. Press the double-cup button once to dispense 100 ml of hot water. Then turn off the
appliance, leaving the descaling solution inside the appliance, for 5 minutes.
3. Turn on the appliance and repeat step 3 three times.
4. Repeat these steps two times using tap water only to the MAX water level (it is not
necessary to wait for 5 minutes).
5. After finish the descaling process, cancel the descaling warning. To do this, hold down the
single-cup, double-cup and steam buttons simultaneously for 3 seconds.
Troubleshooting
Problem
Cause
The drip tray is too full.
Water leaks from the
bottom of the coffee
The coffee maker is
maker.
malfunctioning.
Water leaks out from
There is some coffee
the outer side of the
powder on the edge of
filter.
the filter.
Mineral deposits have not
been cleaned properly.
The espresso
coffee has an acidic
The coffee powder has
(vinegar) taste.
been stored incorrectly and
has gone bad.
The coffee maker
The power outlet is not
does not turn on.
plugged in properly.
Solution
Clean the drip tray.
Contact an authorised service
facility to arrange a repair.
Remove the extra coffee powder.
Clean the coffee maker in
accordance with Section i above.
Use fresh coffee powder, or
store unused coffee powder in
a cool, dry place. After opening
a package of coffee powder,
reseal it tightly and store it in
a refrigerator to maintain its
freshness.
Plug the power cord into a wall
outlet. If the appliance still does
not work, contact an authorised
service facility to arrange a
repair.
Problem
The steam indicator is not
illuminated.
The steam wand
does not froth milk
The container is too big, or
properly.
its shape is not suitable for
frothing milk.
Skimmed milk was used.
The single-cup
The knob was not reset
and double-cup
after dispensing 215 ml of
indicators are
hot water.
flashing quickly.
The knob was not reset
The steam indicator
after making steam for
is flashing quickly.
180 seconds.
The single-cup
or double-cup
The appliance temperature
indicators are
is too high.
flashing quickly.
The single-cup,
The knob is not reset to
double-cup and
the OFF position, but the
steam indicators are
machine is still turned on.
flashing quickly.
All indicators are
The appliance needs to be
flashing 5 times
descaled
simultaneously.
Disposal
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back
of waste. Conrad provides the following return options free of charge (more details on our
website):
• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set
up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.
Technical data
Operating voltage ......................... 220-240 V/AC, 50 - 60 Hz
Power ........................................... 1250 - 1450 W
Water tank capacity ...................... 1 litre
Operating/storage conditions ........ -10 to +40 °C
≤85 % RH (non-condensing)
Dimensions (L x W x H) ................ 312 x 139 x 304 mm
Weight .......................................... 3.85 kg
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE.
Cause
Solution
The steam wand can only be
used to froth milk when the white
indicator is illuminated.
Use a high and narrow container.
Use whole or semi-skimmed milk
Reset the knob to the OFF
position.
Reset the knob to the OFF
position.
Turn the knob to the
position and perform the cooling
operation.
Reset the knob to the OFF
position.
Perform the descaling operation.
*2377925_v3_0522_02_DS_m_2L_(1)
Werbung
