Makita MT361 Betriebsanleitung Seite 9

Ball bearing flush trimming bit (Fig. 21)
D A
6
10
1/4"
Ball bearing corner rounding bit (Fig. 22)
D A1 A2
6 15 8
6
21 8
1/4"
Ball bearing chamfering bit (Fig. 23)
D A1 A2
6
26 8
1/4"
6 20 8
Ball bearing beading bit (Fig. 24)
D A1 A2
6 20 12
6 26 12
Ball bearing cove beading bit (Fig. 25)
D A1 A2 A3
6 20 18 12
6 26 22 12
Ball bearing roman ogee bit (Fig. 26)
D A1 A2
6 20 8
6 26 8
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: cutting grooves in MDF
Vibration emission (a
Uncertainty (K): 1.5 m/s
L1
50
L1 L2 L3
37 7 3.5
40 10 3.5
L1 L2
42 12
41 11
A3 L1 L2 L3
8 40 10 5.5
8 42 12 4.5
A4 L1 L2 L3
8 40 10 5.5
8 42 12
L1 L2 L3 R1
40 10 4.5 2.5
42 12 4.5 3
): 91 dB (A)
pA
): 102 dB (A)
WA
2
): 7.5 m/s
h
2
mm • The declared vibration emission value has been
measured in accordance with the standard test method
L2
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
20
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
mm
tool can differ from the declared emission value
R
depending on the ways in which the tool is used.
3
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
6
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
mm the trigger time).

For European countries only
EC Declaration of Conformity
45°
We Makita Corporation as the responsible
manufacturer declare that the following Makita
60°
machine(s):
Designation of Machine:
Router
mm
Model No./ Type: MT361
R
are of series production and
4
Conforms to the following European Directives:
2006/42/EC
7
And are manufactured in accordance with the following
standards or standardised documents:
mm EN60745
The technical documentation is kept by our authorised
R
representative in Europe who is:
3
Makita International Europe Ltd.
5 5
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
mm
R2
4.5
6
ENG905-1
ENG900-1
2. 12. 2010
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
ENG901-1
ENH101-15
9