auna Poolboy Bedienungsanleitung Seite 18

EN
18
Pairing Poolboy with a BT device
1. Press and hold the ON/OFF button to switch on the Poolboy. The
operating light will be green.
2. Press the pairing button to send out a Bluetooth signal. The pairing light
will flash blue. The unit is now ready for pairing.
3. On the Bluetooth device that you want to connect to the Poolboy, select
the "Poolboy" device in the Bluetooth settings.
4. When pairing and connection have been successfully established,
the pairing light is lit continuously and a signal tone is played by the
Poolboy.
Once the units have been paired, the pairing remains until it is manually
cancelled. In case of connection problems, press the pairing button to
repeat the pairing process
Playing music wirelessly
1. Follow the instructions in the section "Pairing with a Bluetooth device"
2. On the connected Bluetooth device, select the track to be played.
3. Play the track through the unit.
4. The title being played back can now be heard from the Poolboy's
speaker.
Volume control and track selection
• Press and hold [-] to decrease the volume or press briefly to go to the
previous track.
• Press and hold [+] to increase the volume or press briefly to go to the
next track.