Vlano LESTO 50 BK Handbuch Seite 26

EXTRACTOR HOOD DESCRIPTION
The LESTO kitchen extractor hood is an exhaust air cleaning device with a cross-flow fan (turbine) and an
aluminum grease filter. The product is made in a single-engine version with a width of 500 or 600 mm from
carbon steel with a decorative and protective powder coating.
The hood type is "vertical" and is mounted in the kitchen on the walls above the stove.
Depending on the installation scheme, the hood works in two versions (see p. 1.5):
• in exhaust air mode in the chimney hood (Fig. 1);
• in recirculation mode (closed air circulation in the kitchen) (Fig. 2).
Caution! The extractor hood should be mounted on a wall at a distance of 650-750 mm above an electric
stove and at a distance of 750-850 mm above a gas stove.
Distance H:
To electric cooker 65 - 75 cm
To gas cooker 75 - 85 cm
The cooker hood LESTO consists of the next components (Pic.3):
1 - telescopic chimney part (inside)
2 - ventilation slots
3 - chimney bracket
4 - telescopic chimney part (outside)
5 - pipe adapter (Ø150 / Ø120 mm)
6 - Power cable with safety plug
7 - housing
8 - decorative glass front
9 - aluminum filter
10 - decorative glass
11 - sensor control
12 - LED lamps
Pic. 1 Pic. 2
Рic.3