Vlano PLANUS 60 Dark Handbuch Seite 26

EXTRACTOR HOOD DESCRIPTION
The PLANUS kitchen extractor hood is an exhaust air cleaning device with a cross-flow fan (turbine), an
aluminum grease filter and Anti-condensation filter XL. The product is made in a single-engine version
with a width of 600 or 900 mm from carbon steel with a decorative and protective powder coating.
The hood type is "vertical" and is mounted in the kitchen on the walls above the stove.
Depending on the installation scheme, the hood works in two versions (see p. 1.5):
• in exhaust air mode in the chimney hood (Fig. 1);
• in recirculation mode (closed air circulation in the kitchen) (Fig. 2).
Caution! The extractor hood should be mounted on a wall at a distance of 650-750 mm above an
electric stove and at a distance of 750-850 mm above a gas stove.
Distance H:
To electric cooker 65 - 75 cm
To gas cooker 75 - 85 cm
The cooker hood PLANUS consists of the next components (Pic.3):
1 - telescopic chimney part (inside)
2 - chimney bracket
3 - ventilation slots
4 - telescopic chimney part (outside)
5 - pipe adapter (Ø150 / Ø120 mm)
6 - decorative glass front
7 - housing
8 - sensor control
9 - aluminum grease filter
10 - LED lamps
Pic. 1
Рic.3