Technical Specifications - Polar GE632 Bedienungsanleitung

Troubleshooting
If your POLAR appliance develops a fault, please check the following table before making a call to the
Helpline or your POLAR dealer.
Fault
The appliance is not
working
Cabinet temperature is
too Warm
Condensation on the
Cabinet and/or floor

Technical Specifications

Model Voltage Power
GE632 230V~ 50Hz
GE633 230V~ 50Hz
GE632-GE633_ML_A5_v1_20210423.indb 11 GE632-GE633_ML_A5_v1_20210423.indb 11
Probable Cause
The unit is not switched on
Plug or lead is damaged
Fuse in the plug has blown
Power supply
Doors are not shut properly
Appliance is located near a
heat source or air flow to the
condenser is being interrupted
Ambient temperature is too high
Insufficient airflow to the fans
The set temperature is too high
Low refrigerant level
Gasket not sealing well
Temperature
Current
Range
150W 1.1A 2°C ~ 8°C
250W 1.6A 2°C ~ 8°C
Solution
Check the unit is plugged in correctly and
switched on
Call POLAR agent or qualified Technician
Replace the fuse
Check power supply
Check doors are shut and seals are not
damaged
Move the appliance to a more suitable
location
Increase ventilation or move appliance to a
cooler position
Remove any blockages to the fans
Set a lower temperature
Call POLAR agent or qualified Technician
Clean, repair, or replace the gasket as
necessary
Dimensions
Refrigerant
H x W x D mm
R600a (55g) 1312 x 612 x
810
R290 (95g) 1438 x 1247 x
620
UK
Weight
(kg)
63
97
11
2021/4/23 13:26 2021/4/23 13:26