Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
（正式版）1210200241 P10 扫地机器人英德法意西俄说明书_20211228.pdf 10 2021/12/29 10:41:16
3) Auto Cleaning
After startup, the robot vacuum cleaner will plan the cleaning route in a zigzag pattern, then cleans along room' s edge. When the cleaning
is complete, it will automatically return to the charging base to charge.
4) Spot cleaning
Use the remote control to operate the robot vacuum cleaner or directly place it in the lower-left corner of the area to be cleaned, and tap
the Spot button in the App or press the Spot cleaning (
the current position and return to the charging base after cleaning.
5)Spiral cleaning
Use the remote control to operate the robot vacuum cleaner or place it in cleaning-centered area, tap Spiral button in the app or press the
Spiral cleaning (
base after cleaning.
6) Edge cleaning
Tap the Edge button in the app or press the Edge cleaning ( ) button on the remote control, the robot vacuum cleaner will find the wall
and clean along the wall automatically. When the cleaning is complete, it will return to the charging base to charge.
7) Scheduled cleaning
Tap the Settings button in the app, set a cleaning time, then the robot vacuum cleaner will start to clean at the specified time. When the
cleaning is complete, it will go back to the charging base to charge.
8) Reset Wi-Fi
When you need to connect the robot vacuum cleaner with other mobile phone, or when the mobile phone fails to connect to it, please
press and hold the Clean ( ) button on it for 8 seconds or press and hold the Wi-Fi( )button on the remote control for 3 seconds until you
hear the voice prompt, then the Clean (
9） Suction mode
C
Tap the suction button in the app, you can select Quiet, Standard, Powerful, and Max suction modes in the app.
M
Y
Part 4 Specifications
CM
Part 4 Cleaning and Maintenance
MY
Main units
CY
4.1 Cleaning the side brushes
Dimensions
CMY
Battery capacity
Clean the side brushes and replace them if they are damaged.
K
Battery
Notes:
B
e
o f
e r
ing marking at the bottom of the robot vacuum cleaner.
Charging duration
4.2 Cleaning the main brush
Dustbin capacity
Charging methods
• Turn off the robot vacuum cleaner. Press the two tabs on the main brush cover to remove the cover and then remove the main brush on
Cleaning mode
the right. Use the cleaning brush to remove hair and other dirt from the main brush.
Operaing
• Rinse the main brush under running water and do not replace it until it is dried completely.
humidity range
Operaing
temerature range
Noise
) button on the remote control, then it will perform the cleaning from the current position and return to the charging
) button indicator will quickly blink blue, indicating that the Wi-Fi has successfully been reset.
315*315*79mm
2600mAh
Lithium battery
e r
p
a l
c
n i
g
h t
e
s
d i
e
b
u r
s
h
s e
c ,
h
e
c
k
h t
≤300min
510ml
Auto-charging/manual charging
Auto/Spot/Spiral/Edge
≤90%RH
0~45℃
≤ 65dB
) button on the remote control, then it will start a zigzag cleaning for the area from
Accessories
Power adapter
Output voltage
Output current
e
"
L
"
&
"
R
"
m
a
k r
e
d
o
n
h t
e
t
w
o
s
d i
e
Charging base
Input voltage
-6-
19V
0.6A
b
u r
s
h
s e
a
n
d
m
a
k
e
s
u
e r
h t
e
y
m
a
c t
h
19V
h t
e
c
o
r r
s e
p
o
n
d
-
Werbung
Inhaltsverzeichnis
