OPERATING MANUAL
9 DESCRIPTION OF THE TRANSMITTER
Figure 5.
The Sesam 800 M6 transmitter indicator and buttons
9.1 Indications on the Transmitter
Normal operation:
Quick flashing RED LED =
Continuous GREEN LED =
Battery warning:
Continuous RED after activating
a command =
3 long RED LED flashes =
10 OPERATION
The object is controlled via the
order to controlling the object. Some of the buttons may be set as remaining functions.
For relationship between outputs and buttons see table 2.
Document-ID: 947422-000 Multi
Indicator LED
Control buttons
1 2 3
4 5 6
Sending message but no feedback
available from the receiver.
Output activated in the receiver
(feedback information from receiver).
Low battery.
Battery depleted, transmitter can not send
commands.
buttons on the transmitter.
Press the buttons on the transmitter in
Version: C0
11 (112)
EN