CMi C-ELH-2500/44 Original-Gebrauchsanweisung Seite 31

214389_Schredder_Elektrisch.book Seite 31 Dienstag, 13. April 2021 9:23 09
• Keep children and bystanders away while
operating the product. Distractions may cause
you to lose control of the product.
Service
• Have your product serviced by a qualified
repair person using only identical replace-
ment parts.
This will ensure that the safety of the product is
maintained.
Maintenance.
• Check all screws regularly to ensure that they
sit tight. This will ensure that the safety of the
product is maintained.
• Only use original spare parts. Only these repla-
cement parts are designed and suitable for the
product. Other replacement parts will not only
lead to an invalidation of the warranty, they may
also endanger you and your environment.
Storage and transportation
• Make sure the product is always stored in dry
conditions.
• Protect the product from becoming damaged
during transport.
Personal protective clothing
Wear goggles, ear defenders, and
helmet when working with the de-
vice.
Wear protective gloves!
When working with the product,
wear sturdy footwear.
Symbols on the product
Observe all the safety instructions
provided in the operating instruc-
tions!
Read the operating instructions
before using the device.
Do not work in a damp en-
vironment.
Declared sound value
92
Always ensure sufficient safety
distance is maintained.
Risk posed by flying parts.
Risk of cuts.
Risk posed by rotating cutting tool.
Switch off and remove plug from
mains before adjusting, cleaning or
if the cord is entangled or
damaged.
Wait until the cutting tools have
come to a standstill before carrying
out cleaning or maintenance work.
STOP
Do not stand under the ejection
opening.
Cutting clearance adjustment.
Electrical safety
• The plug of the product must fit into the
socket. Never modify the plug in any way. Do
not use an adapter in conjunction with pro-
tective-earth power tools.
Unmodified plugs and the appropriate sockets
reduce the risk of electrical shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet con-
ditions.
Water entering a power tool will increase the risk
of electric shock.
• When the power is interrupted, switch the
product off and unplug at the mains. This pre-
vents accidental start up of the product when
power is restored.
GB
31