Led Behaviour; Channels - Niko 350-34001 Technische Anleitung

350-34001/350-34002/350-340X3/350-340X4/350-34902

4.2. LED behaviour

Parameter Description
LED behaviour when motion This parameter is used to configure whether the LED turns on or remains off when motion is detected.
is detected Default value: ON
ON
OFF
LED behaviour after motion This parameter is used to configure whether the LED turns on or remains off when motion is no longer detected.
Default value: OFF
has been detected
ON
OFF
LED behaviour when in lock
Configure whether the LED turns on, remains off or flashes when a channel is locked.
mode Default value: Blink
ON
OFF
Blink (ON 0.5 s, OFF 2 s)
LED behaviour when
Configure whether the LED turns on, remains off or flashes when a 1 is sent to object 4. This enables you to manually control the LED.
Default value: OFF
triggered by an external
device
ON
OFF
Blink (ON 1 s, OFF 1 s)

4.3. Channels

Parameter Description
Channel 1 This parameter allows you to select and activate the functions of channel 1.
Automatic
Lux value switch
Alarm mode
Constant light control
4
EN
The LED turns on when motion is detected.
The LED remains off when motion is detected.
The LED turns on after motion has been detected.
The LED remains off after motion has been detected.
The LED turns on when a channel is locked.
The LED remains off when a channel is locked.
The LED blinks when a channel is locked.
The LED turns on when a 1 is sent to object 4. The LED turns off when a 0 is sent to object 4.
The LED remains off when a 1 is sent to object 4.
The LED blinks when a 1 is sent to object 4. The LED turns off when a 0 is sent to object 4.
1. When in Automatic mode, the load is activated automatically when motion is detected and the ambient light level is below the lux setting
value. When no motion is detected and the switch-off delay time has expired, the load will go off automatically.
2. The switching output for the channel is locked with an ON telegram and unlocked with an OFF telegram.
3. The alarm function can be set to react differently or identically at switch ON and switch OFF.
In lux value switch mode, the twilight switch sends an ON telegram if the threshold value is not reached during the entire switching time. An OFF
telegram is sent if the threshold value is exceeded during the entire switching time.
1. The number of motions detected within a specific time span can be customised as a condition for triggering an alarm. An alarm is triggered if
a continuous number of moving objects are detected.
2. The alarm function can be set to react differently or identically at switch ON and switch OFF.
3. The switching output for the channel is locked with an ON telegram and unlocked with an OFF telegram.
1. In constant light control mode, the detector monitors changes in the ambient light level and matches the dimming level of the lighting to the
lux setting value.
2. The switching output for the channel is locked with an ON telegram and unlocked with an OFF telegram.
PM350-34x0x_EN