Proper Use; Technical Data; Before Starting The Equipment - EINHELL TE-BJ 18 Li Originalbetriebsanleitung

•
Rubber tips
•
Original operating instructions
•
Safety instructions

3. Proper use

The cordless biscuit jointer is designed for cutting
slots in solid wood, plywood, and particleboard.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Voltage supply to motor .......................... 18 V DC
Rated speed: ....................................... 6,500 rpm
Cutter dimensions ................ø 100 x ø 22 x 4 mm
Cutting depth .................................... max. 20 mm
Angle adjustments ......................................0-90°
Weight: ...................................................... 2.4 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ..................... 75.7 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ....................... 86.7 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Handle
Vibration emission value a
K uncertainty = 1.5 m/s
Anl_TE_BJ_18_Li_SPK13.indb 17
= 2.565 m/s
2
h
2
- 17 -
GB
Additional handle
Vibration emission value a
K uncertainty = 1.5 m/s
2
The specifi ed vibration emission value was esta-
blished in accordance with a standardized testing
method. It can change depending on how the
electric equipment is used and may exceed the
specifi ed value in exceptional circumstances.
The specifi ed vibration emission value can be
used to compare the equipment with another
electric power tools.
The specifi ed vibration emission value can be
used for initial assessment of any potential nega-
tive impact.
Keep the amount of noise generated and the
vibrations to a minimum.
•
Only use equipment that is in perfect working
order.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when it is not in use.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.

5. Before starting the equipment

Warning!
Always remove the battery pack before ma-
king adjustments to the equipment.
5.1 Dust bag assembly
•
The dust bag (7) is mounted by pushing it
onto the dust bag adapter (6).
= 2.683 m/s
2
h
10.11.2021 08:20:28