Herunterladen Diese Seite drucken

inels RFATV-2 Montageanleitung Seite 2

Funkgesteuertes thermostatventil

Werbung

RFATV-2
Wireless thermo-valve
EN
Funkgesteuertes Thermostatventil
DE
AT
Calibration takes approx. 4 s, as soon as the diode starts fl ashing, the device is ready for pairing.
3.
Use the address to pair with RF Touch, eLAN-RF or RFTC-100 / G (see RF Touch, eLAN-RF or
RFTC-100 / G manual). The RFATV-2 address is located on the bottom of the thermocouple.
Die Kalibrierung dauert etwa 4 Sekunden. Sobald die LED zu blinken beginnt, ist das Element
bereit für die Kopplung.
Verwenden Sie die Adresse zur Kopplung mit RF Touch, eLAN-RF oder RFTC-100/G (siehe
Anleitung zu RF Touch, eLAN-RF oder RFTC-100/G). Die Adresse des RFATV-2 ist auf dem
Gehäuse des Elements unter der Batterieabdeckung angegeben.
4.
Pairing:
1. Press the control button for 10 seconds, which is located on the front of the product
2. The calibration takes place for approx. 4 s, as soon as the diode starts fl ashing, the device is ready for pairing
3. Pair with eLAN-RF 103 or RF-Touch-2 using the address or QR code. The address is indicated on the body of the device under the battery cover
4. If the head does not pair with any device within 1 minute, it will return to the pre-pairing mode
Kopplung:
1. 10 Sekunden lang die Funktionstaste an der Vorderseite des Geräts drücken.
2. Die Kalibrierung dauert ca. 4 Sekunden; sobald die LED zu blinken beginnt, ist das Element für die Kopplung bereit.
3. Koppeln Sie mit Hilfe der Adresse oder des QR-Codes mit dem eLAN-RF 103 oder RF-Touch-2. Die Adresse ist auf dem Gehäuse des
Elements unter der Batterieabdeckung angegeben
4. Wird der Thermokopf innerhalb von 1 Minute mit keinem Element gekoppelt, kehrt es in den Modus vor dem Koppeln zurück.
Communication /
Kommunikation
RF Touch 2, eLAN-RF-103, eLAN-RF-Wi-103
Interval communication with the control unit in saving mode is 12 minutes.
Interval communication with the control unit in normal mode is 6 minutes.
Radio frequence signal penetration through various construction materials /
RFRP-20N
Made in Czech Republic
ELKO EP, s.r.o. | Palackého 493 | 769 01 Holešov, Všetuly | Czech Republic | e-mail: elko@elkoep.com | Support: +420 778 427 366
ELKO EP Germany GmbH | Minoritenstr. 7 | 50667 Köln | Deutschland | E-mail: elko@elkoep.de | Tel: +49 (0) 221 222 837 80
www.elkoep.com / www.elkoep.de
RF Touch 2, eLAN-RF-103, eLAN-RF-Wi-103
Im Energiesparmodus beträgt das Kommunikationsintervall mit der Steuereinheit 6 Minuten.
Im Normalbetrieb beträgt das Kommunikationsintervall mit der Steuereinheit 2 Minuten.
Radiofrequenzsignal dringt durch verschiedene Baumaterialien
60 - 90 %
80 - 95 %
wooden structures
brick walls
with plaster boards
Holzkonstruktionen
Ziegelwände
mit
Gipskartonplatten
address /
Adresse
20 - 60 %
0 - 10 %
reinforced
metal partitions
common glass
concrete
Stahlbeton
Metallwände
02-4/2022 Rev.0
PROG button
Taste PROG
80- 90 %
Glas
2/3

Werbung

loading