Accessories; Remedying Faults - Berner 22624 Montage- Und Gebrauchsanleitung

Bed.-Anl. IS-Sauger BERNER.QXD

9. Accessories

Fix the vacuum tube by inserting it in the
corresponding recesses in the rear wall of the
container.
The wire basket z is inserted from above into
the suspension t in the top section 1.

10. Remedying faults

Functional faults are not necessarily always
due to a defective appliance.
Fault: Possible Cause/Remedy:
– Decreasing Clogged filter – Clean.
suction Paper filter is full – Change.
force. Container full – Empty.
Clogges motor protection filter
– Clean.
Clogged nozzle, tube or hose
– Clean
– Appliance Is the plug inserted in the
does not socket?
start. Mains failure?
Is the power supply cable
broken?
Has the appliance hood been
properly closed?
Has the water sensor switched
off the appliance?
No other "interventions" are permitted; please
consult the servicing workshop.
16
26.10.2005 14:05 Uhr
GUARANTEE AND GUARANTEE SERVICE
Each tool, spare part or accessory is
consistently checked before being dispatched
from the manufacturing plant. If, despite this
fact, there are any defects, please send the
item directly to our Client Service
Headquarters or to the nearest service repair
shop of the firm BERNER.
The guarantee period ist 12 months and starts
from the day of purchase, which must be
proved by the original of the purchase
document. During the guarantee period the
producer guarantees:
• free removal of possible defects;
• free replacement of all damaged parts;
• free professional servicing.
This is conditioned on the fact that the defect
or failure was not caused by unprofessional
service and that only original spare parts
which BERNER exclusively recommends for
use in BERNER tools were used.
The addresses of repair workshops are given
on the reverse side.
Seite 16