Fairland oku TurboSilence AquaX Installations- Und Gebrauchsanleitung Seite 11

2. Adjust Set Temperature: When screen is unlocked, press
temperature.
3. Turbo/Smart/Silence mode selection:
①
Smart mode as default will be activated when heat pump is on, and screen shows
② Press
to enter Turbo/Booster mode, and screen shows
mode, the screen shows
Attention:
a. When use the Turbo mode, you should select it every time, the machine will not automatically enter the
Turbo mode.
b. During the Turbo mode, when the machine reaches the set temperature, it will automatically return to the
smart mode.
4. Defrosting
a. Auto Defrosting: When heat pump is defrosting,
flashing.
b. Compulsory Defrosting: When heat pump is heating, press
start compulsory defrosting, and
(Note: Compulsory defrosting intervals should be more than 30 minutes and the compressor should run
for more than 10 minutes.)
Temperature display conversion between ℃ and ℉:
5.
Press " " and "
6. Wifi setting
Please kindly check the last page.
. Press again, the screen shows
will be flashing. After defrosting,
" together for 5 seconds to switch between ℃ and ℉.
or
, then press
will be flashing. After defrosting,
and
- 8 -
For users
to display or adjust the set
.
to enter Silence
and return to Smart mode.
will stop
together for 5 seconds to
will stop flashing.