Safety Instruction - KingSmith WalkingPad TRR2F Benutzerhandbuch

7. Fault caution light
E01: Software overcurrent
E02: Hardware overcurrent
E03: IPM module overheating
E04: Low-voltage protection
E05: High-voltage protection
E06: Motor phase loss protection
E07: Motor block rotation protection

Safety instruction

The distance behind the
Treadmill should be superior
to 2000 mm. You can hold the
handrail tightly to support
your body and jump away
from the Treadmill.
E08 Sensor fault
E09 Motor unable to start
E12 Motor overcurrent protection
E13 Overloading protection
E14 Hall signal loss
E15 Communication fault
The distance on each side of the
Treadmill should be superior to
500 mm.
16