Ufesa Totalchef RK7 Bedienungsanleitung Seite 35

6. Chop program:
Select "chop" icon (39) to enter into chop function.
Default time is 10 seconds and it's adjustable from 10seconds-4 minutes.
Temperature at this function is blocked.
Default speed is 6 and it's adjustable from 1-12.
7. Turbo program:
Select "turbo" icon (40) to enter into turbo function.
Default time is 1 minute.
Temperature at this function is blocked.
Default speed is 12. Press "turbo" icon or knob and release to stop.
8. Weigh program:
Select "weigh" icon (41) to enter into weigh function.
The maximum weight is 5000g. Weight range: 5-5000g.
LCD shows as "0 g". Put the food in the bowl, read the number shown on the
display. That is the weight of the food added. And then press "Tare" icon, the
number on display will be cleared and shows as "0 g". Press "End" icon and the
appliance will exit from weighting function.
Automatic recipes
Access to "Automatic Recipes" by pressing the grey dot on the left at the bottom of the
screen from the start home menu (42). Slide the screen or turn the knob to view all the
recipes (See figure N). You can also search alphabetically the desired recipe by clicking "A-
Z" icon (43), search by specific word a recipe by clicking the magnifying glass (44) or search
recipes by type by clicking the sort management icon (45).
The appliance allows you to save favorites recipes and access the history of recipes
cooked by clicking the 3 dots menu (46).
After making your choice, the screen will show you all recipe information (See figure
O). You can check the ingredients list (47), cooking description (48), chef's tips (49) and
accessories list needed (50). Press "Start" icon (51) to start the interactive recipe. Press
favorite icon (52) to add to your favorite recipe collection.
The recipe has preset parameters (See figure P). You can follow guided recipe step-by-step
and start cooking process. The display will show the step working number at the bottom
(53). Click cutlery icon (54) to check all step-by-step process, ingredients list and tips.
Settings (Setup UI)
Click the setting icon (31) to access to settings (See figure Q).
Press "Network parameter" (55) and search for your Wifi connection. Insert your Wifi
password, wait for some seconds and the device will be connected.
Important: this device only support Wifi 2.4GHz (5GHz are not supported).
You can change the language by selecting the "Language" icon (56).
35