Automatic Programmes - Ufesa Totalchef Rk7 Bedienungsanleitung

Automatic programmes

Access to "Automatic Programmes" by pressing the grey dot on the right at the bottom of
the screen from the start home menu (33)
You can select between 8 preset functions for different cooking purpose: knead, stem,
slow cook, boil, food processor, chop, turbo and weigh (See figure M).
1. Knead program:
Select "knead" icon (34) to enter into knead function.
Default time is 3 minutes and it's adjustable from 2-3 minutes.
Temperature at this function can be selected at 37ºC or cook without
temperature (0ºC).
The speed is not adjustable, the speed is 3 by default.
2. Steam program:
Select "steam" icon (35) to enter into steam function.
Default time is 20 minutes and it's adjustable from 1-60 minutes. The timer
will start countdown once the inside water temperature arrives to 95ºC.
Default temperature is Fast and it's adjustable from Slow-Medium-Fast.
Default speed is 0 and it's adjustable from 0-3 (you can cook without any
speed).
3. Slow cook program:
Select "slow cook" icon (36) to enter into slow cook function.
Default time is 60 minutes and it's adjustable from 1-90 minutes.
Default temperature is 100ºC and it's adjustable from 60ºC-100ºC with
intervals of 5ºC.
Default speed is 1 and it's adjustable from 1-3.
4. Boil program:
Select "boil" icon (37) to enter into boil function.
Default temperature is 100ºC and it's adjustable from 60ºC-100ºC with
intervals of 5ºC.
Speed and time are not adjustable on this function, but the display will show
cooking boiling time process.
5. Food processor program:
Select "food processor" icon (38) to enter into food processor function.
Default time is 30 seconds and it's adjustable from 10-60 seconds.
Temperature at this function is blocked.
Default speed is 5 and it's adjustable from 4-6.
34