Signing On/Off The Remote Control; Signing On - Miele DARC 6 Gebrauchsanweisung

Signing on

The remote control must be signed on
so that it can be used.
Signing on and off must be done at the
same time on the cooker hood and the
remote control. Signing on/off mode
has to be accessed on the cooker hood
first, then on the remote control.
 Press the 515 fan run-on control
for approx. 10 seconds until the
indicator for power level 1 lights up.
 Then press in turn:
- the "" control (1)*,
- the "" control (IS/B)*,
- the lighting control ,
- to sign on press the "" control (IS/
B)*
On DA xxx8 model cooker hoods: wait
until 2 and 3 light up continuously and
B flashes.
 On the remote control press
- both arrow controls  at the same
time for approx. 5 seconds until the
remote control LED flashes,
- then press the lighting control ,
- then press the "" control to sign on.
The search for a wireless connection
will start. The remote control LED
flashes regularly.
After approx. 30 seconds, the remote
control LED flashes on and off four
times with short intervals between the
flashes. The wireless connection has
now been established. The LED will go
out after a short while.
en - Signing on/off the remote control
 Confirm the signing on procedure by
The remote control can now be used.
If confirmation is not carried out within
4 minutes, activation will not take place.
To cancel the signing on procedure
 If it is not possible to sign on, the
 The signing-on procedure must then
To sign off
 Press the 515 fan run-on control
 Then press in turn:
- the "" control (1)*,
- the "" control (IS/B)*,
- the lighting control ,
- press the "" control (1)* to sign off.
 On the remote control press
- both arrow controls  at the same
- then press the lighting control ,
- then press the "" control to sign off.
The remote control LED flashes
regularly.
pressing the 515 run-on control on
the cooker hood. All the indicator
lights will go out.
procedure can be cancelled by
pressing the 515 run-on option
control on the cooker hood and on
the remote control.
be repeated. To do this the cooker
hood and the remote control must
first be signed off.
for approx. 10 seconds until the
indicator for power level 1 lights up.
time for approx. 5 seconds until the
remote control LED flashes,
19